System Overview
04
The Culligan Ascent™ 80 Bottle Free Cooler comes equipped with features one can expect
from a state-of-the-art BFC from Culligan. Highlights include:
- Touch free PSD sensors for selecting water temperature and dispensing water
- Glass upper front panel for a high-end contemporary design
- 12.25” dispense area
- Comfortable dispensing height with drip tray 32” from floor
- ADA wheelchair height compliant (when installed in accordance with ADA require
ments)
- In-tank LED UV to help maintain the cleanliness of the reservoir
- Customizable filter alerts
- Leak detection and leak stop
- Color changing dispense area indicator light (Blue for cold, Red for hot)
- Cold water dispense pump provides flow at 3.0 lpm, more than twice the rate of
a standard cooler
- Hot water dispense pump increases access to available hot water capacity
- Air filter to help keep airborne particles from the water in the reservoirs
- Optional drip tray to drain connection
The Ascent™ 80 is available in two filter configurations:
1. Ascent 80-RO: This Ascent 80 R model filters your water through a series of filters and an
RO membrane to reduce contaminants. These are:
A 10 micron sediment filter (P/N BFC-SED)
B. Pre-carbon GAC filter (P/N BFC-PRE)
C. 80 gallon per day RO membrane (P/N BFC-RO80)
D. Mineral filter to improve taste and increase alkalinity and
electrolytes.(P/N BFC-PH)
E. GAC post filter with 1 micron mesh (P/N BFC-POST)
2. Ascent 80-M: This Ascent 80 model filters your water through the following filters:
A. 10 micron sediment filter (P/N BFC-SED)
B. Pre-carbon GAC filter (P/N BFC-PRE)
C. 1 micron carbon block with lead reduction rating (P/N BFC-LR) **NOTE: a 0.5 gpm flow
regulator must be used in order to comply with the lead reduction rating
To Next Page
Loading...
