Need help?Do you have a question about the Culligan Super S and is the answer not in the manual?
General| Brand | Culligan |
|---|---|
| Model | Super S |
| Category | Water Dispenser |
| Language | English |
Explains the meaning of Notice, Caution, and Warning symbols used in the manual.
Details the various components included with the water filter system.
Steps for preparing filter media and underbedding before installation.
Lists all necessary tools and materials for installation.
Instructions for installing bypass valves for service access.
Guidance on choosing an appropriate installation location and its requirements.
Steps to prepare the media tank, including fitting installation.
Detailed instructions for installing the Cul-Flo-Valv bypass.
Procedure to check for leaks after the bypass is installed.
Instructions and limitations for connecting the drain line.
Details on component locations, DIP switch settings, and programming the unit.
Explains compressor settings, recharge frequency, backwash, regenerant draw, and rinse cycles.
Instructions for setting the air relief solenoid and compressor.
Procedures to verify the unit's performance after start-up.
Steps to check the air injection check valve function.
Details on compressor cycles, manual recharge procedures, and bleach usage.
Procedures for maintaining the air injection check valve and air relief solenoid valves.
To Next Page
