Need help?Do you have a question about the Culligan MEDALLIST SERIES and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Flow Rate | Up to 12 gallons per minute |
| Resin Type | High-capacity resin |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Tank Material | Fiberglass |
Guidelines and warnings for safe operation and installation of the water softener.
Location and importance of serial numbers for warranty and service.
Explains the natural process of water hardening and its causes.
Overview of the water conditioner's three main components and their functions.
Lists necessary tools and materials for installation.
Details on water quality, pressure, and temperature requirements for the unit.
Guidance on choosing a suitable installation site considering space, floor, and utilities.
Instructions for positioning the media tank and brine system.
Step-by-step guide for attaching the 3/4" control valve to the tank.
Step-by-step guide for attaching the 1" control valve to the tank.
Procedure for replacing the eductor nozzle.
Procedure for replacing the backwash flow control.
General instructions for making plumbing connections.
Instructions on connecting the bypass valve.
Specifics for installing the 1" bypass valve on Medallist Plus units.
Steps for connecting the drain line, including length and height limits.
Detailed instructions for connecting the brine line to the unit.
Guide for connecting the Soft-Minder meter leads to the circuit board.
Instructions for connecting the power cord and transformer.
How the Soft-Minder meter controls regeneration based on water usage.
How the time clock controls regeneration based on fixed intervals.
Steps to set the current time of day on the control unit.
How to program the desired time for regeneration cycles.
Setting the days between regenerations in time clock mode.
Setting days between regenerations for meter mode with time clock backup.
Adjusting the amount of salt used per regeneration cycle.
Setting the duration for the backwash cycle (Cycle 1).
Setting the duration for brine draw/slow rinse (Cycle 2).
Setting regeneration trigger for flow meter operation.
Exiting programming mode or accessing diagnostics/statistics.
Displays current water flow rate when a flow meter is attached.
Shows remaining water capacity before regeneration is needed.
Counts regenerations performed within the last 14 days.
Tracks the number of days elapsed since the last regeneration.
Displays the total count of regenerations since the unit was installed.
Explains the timeout behavior for the statistics mode.
Conditions that trigger a regeneration cycle and how the unit behaves.
Step-by-step procedure for starting the water softener after installation.
How the control sets salt usage based on household factors.
Guidance on selecting the appropriate type of salt for the softener.
Information about Culligan's salt delivery service.
Basic maintenance and cleaning instructions for the unit.
Schedule for routine inspections and maintenance of system components.
Lists error codes and their corresponding responses from the unit.
General advice on preliminary checks before contacting a dealer.
Verifying power supply, fuses, and power failure impact.
Checking bypass valves, water pressure, and usage impact.
Addressing salt supply, bridging, and increased water usage.
Instructions for operating the bypass valve to bypass or return to service.
Detailed list of service parts for the power valve assembly.
Fields to record model, serial numbers, and installation date.
Fields to record salt setting, recharge time, and regeneration interval.
Fields to record water hardness, iron, and pH levels.
Highlights the expertise and service of Culligan technicians.
Culligan's commitment to water quality and customer satisfaction.
To Next Page
