EasyManua.ls Logo

Culligan MARK 89 User Manual

Culligan MARK 89
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CULLIGAN
®
MARK 89 AND 812
AUTOMATIC
WATER CONDITIONER
©2000 Culligan International Company
Cat. No. 01882324
Rev. A 12/7/00
DCO#1809
Installation
and
Operating
Instructions
Printed in USA

Other manuals for Culligan MARK 89

Question and Answer IconNeed help?

Do you have a question about the Culligan MARK 89 and is the answer not in the manual?

Culligan MARK 89 Specifications

General IconGeneral
BrandCulligan
ModelMARK 89
CategoryWater Dispenser
LanguageEnglish

Summary

Introduction

Safety Practices and Warnings

Details on how to interpret safety warnings like NOTICE, CAUTION, and WARNING in the manual.

Serial Number Identification

Location and importance of control valve and media tank serial numbers for warranty.

Specifications

Preparation

Tools and Materials for Preparation

Lists required tools, supplies, and materials for installing the water conditioner.

Water Quality and Pressure Requirements

Guidance on water quality and pressure requirements before installation.

Installation

Installation Placement Guidelines

Guidelines for positioning the media tank and brine system for optimal installation.

Control Valve Mounting Procedure

Instructions for attaching the control valve assembly to the tank couplings.

Bypass Valve Installation Methods

Details on installing bypass valves for time clock or Soft-Minder meter units.

Sweat Adaptor Installation Method

Instructions for connecting the unit using sweat adaptors, requiring specific tools.

Brine Line Connection Steps

Steps to connect the brine line from the brine tank to the brine fitting on the control valve.

Drain Line Connection Procedure

Procedure for connecting the drain line to the drain elbow and securing it properly.

Salt Storage Container Filling

Instructions on filling the salt storage container with water and salt.

Settings

Backwash Time Adjustment

Adjusting the backwash interval for optimal resin bed cleaning and maintenance.

Setting the Time of Recharge

Setting the desired time of day for the automatic recharge cycle.

Timer Time of Day Setting

How to set the current time of day on the timer mechanism after installation or power loss.

Optimal Time Clock Settings

Determining optimal settings based on water hardness and household size.

Salt Dosage Adjustment

Adjusting the salt dosage dial for efficient regeneration based on water conditions.

Setting Regeneration Frequency

Setting the frequency of regeneration based on water usage and pin settings.

Soft-Minder Meter Operation

Explanation of the water meter that controls regeneration based on consumption.

Gallons Setting for Regeneration

Setting the gallons capacity on the circuit board based on daily water use and hardness.

Start-Up Procedure

Pre-Handover Checks and Customer Briefing

Ensuring brine tank is filled, explaining operation, and advising customer on salt replenishment.

Appendix A - Sanitizing Instructions

Wiring Schematics

Automatic Clock Timer Wiring Schematic

Diagram illustrating the electrical connections for the automatic clock timer.

Soft-Minder Meter Wiring Schematic

Wiring diagram for the timer mechanism when equipped with the Soft-Minder meter.

Parts Lists

Control Valve Parts List

List of parts for the control valve assembly with part numbers and descriptions.

Conditioner Tank Parts List

List of components and parts for the water conditioner tank assembly.

Salt Storage Tank Parts List

List of parts for the salt storage tank, including covers, tanks, and plates.

Brine Valve Parts List

Detailed list of parts for the brine valve assembly and its components.

Timer Parts List

List of components for the timer mechanism, including dials, gears, and switches.

Related product manuals