Page 46 40 Series Granulators
12 Spare Parts
12-1 Recommended Spare Parts
In order to reduce the amount of down time required to
service a granulator, it is recommended that the following be
kept in stock at your facility:
(1) set of rotor knives and bolts
(1) set of bed knives and bolts
(1) screen or set of screens, (depending if your model
requires multiple screens)
(1) set of belts
(1) set of fuses
(1) set of motor starter heaters
(1) cyclone filter bag (optional)
12-2 Additional Parts
If additional spare parts are required for your granulator,
please consult the Cumberland Spare Parts Department. The
serial numbers of the specific components will be required
when ordering parts from Cumberland.
NOTE: Refer to part numbers in the spare parts catalog when
ordering replacement parts. Check the parts carefully as
knives and screens generally have their numbers etched or
stamped on them. The serial number of the machine will
be required when ordering parts from Cumberland. This
listing of recommended parts does not include all parts,
which are available for purchase. The Cumberland Parts
Department can be reached via +44 (0)1453 768980.
To Next Page
Loading...