40 Series Granulators Page 41
8. Double check inside the machine to make sure no tools
or other articles are left in the cutting chamber or have
fallen into the screen area.
9. Close the cutting chamber and tighten the fasteners
(refer to Section 4-2).
9-9 Preventative Maintenance Service
Follow a systematic preventative maintenance program to
help avoid costly down time. Call the Cumberland Europe
Ltd., Service Department, to arrange a schedule of
inspections. This service can be tailored to fit your
maintenance requirements.
9-10 Recommended Torque For Knife Bolts
NOTE: For Rotor & Bed knife applications, use Grade 10.9 hex
head cap screws.
Table 6
Recommended Bolt Torques (Metric)
**The above listed torque values are standard specifications.
***Metric Knife Bolt/Screw Tightening Torque for Grade 10.9 Fine Thread
To Next Page
Loading...