Cumberland PRO-VISION User Manual

45
PRO-VISION rev.04
PRO-VISION
Amp draw & Operation cost. See Amperage
draw
Operation & settings 31
Egg room T° sensors 33
Electrical current sensor. See Amperage draw
Electrical specications 43
Empty zones. See Non-brood zones
English software 9
F
Fahrenheit units 10
Fans / Tunnel fans
Amp draw & Operation cost. See Amperage
draw
Fan shutoff in tunnel mode 25
Fan / Tunnel fan outputs
Activation 10
Current status 39
Relay assignment 14
Minimum ventilation fans. See also Minimum
vent.
Fan cycling 18
Lateral fan selection 21–22
Tunnel fan selection 25–26
Operation & settings
Lateral fans 21–22
Tunnel fans 24–25
Feeders
Cut-off relay
Output status 39
Relay assignment 14
Feeder run time
Activation of feeder inputs 11
Run time alarm 38
Run time history 40
Flock. See Animals
G
Gallons 10
H
Heaters
Activation 10
Amp draw & Operation cost. See Amperage
draw
Egg room heaters. See Egg room
Heater run time
History 40
Today’s run time 39
Heaters in non-brood zones. See Non-brood
zones
Hi Fire heaters. See also Heaters
Activation 10
Operation & settings 28
Operation & Settings 28
Output status 39
Relay assignment 14
RH compensation with heaters
Activation 10
Settings 34
Sensor assignment 12
History menus 40
Home key 7
Humidity. See Relative humidity
I
Index 44
Inlets. See Sidewall vent, attic vent or tunnel inlet
Inputs. See also Sensors
Activation 9–12
Input status 39
List of available inputs 5
Installation (Set-up menu)
Parameter settings 9–12
Worksheet 51
Installer password. See Password
K
Keypad
Beeper volume 9
Location 7
L
Language selection 9
Lateral ventilation. See also Sidewall vents & Fans
Operation & settings 21–22
Overview of the ventilation concepts 17
LCD screen 7
Diagnostic 42
LED (Alarm) 7
Lights
Lights on the 0-10V output
0-10V Wiring 7
Activation 11
Current intensity 39
Diagnostic 42
Operation & Settings 29–31
On/off lights
Activation 14
Amp draw & Operation cost. See Amperage
draw
Principle of operation 29
Relay assignment 14
Liters 10
M
Main menu shortcut key 7
Measuring units 10
Memory cards (USB) 41–42
Menu selectors 7
Minimum ventilation
Compensation of the “On Time”
According to the attic temperature 19
According to the RH level
Activation 10
Settings 34
Fan cycling 18
Fan selection
Lateral fans 21–22
Tunnel fans 25
Operation & settings 18–20
Overview of the ventilation concepts 17
Pre-opening of sidewall vents in min. vent.
Mode: Automatic or programmable delay 11
Principle of operation 19
Settings 22
Stir fans in min. vent. 11, 27
Minimum ventilation ramp
Night ramp 11
Operation & settings 18–20
Mortality
History 40
Posting new mortalities 40
Mounting instructions 6
N
Natural ventilation
Natural curtain
Activation 10
Sensor assignment 12
Operation & settings 23
Non-brood zones
Low T° alarms in clean mode
Activating the alarm condition 15
Alarm limit 36
Making a non-brood zone 12
Principle of operation 14
T° alarms in non-brood zones 36
T° set point in non-brood zones 16
O
Operation costs 41. See also Amperage draw
Outputs. See also Relays
Activation 9–12
Amp draw & Operation cost. See Amperage draw
Diagnostic 42
List of available outputs 5
Output status 39
Outside temperature. See Temperature
P
Parameter adjustment 7
Password
Enable/disable the password 11
Entering/changing the password 8
Retrieving a lost password 8
Pilot light (Alarm) 7
Programs
Copy/paste program settings 9
Enabling programs 10
Principle of operation 9
Program selection 9

Cumberland PRO-VISION Specifications

General

Brand	Cumberland
Model	PRO-VISION
Category	Temperature Controller
Language	English