Cumberland Smart-Flex FLX-4629 User Manual

2. Smart-Flex (FLX-4629) Operation Instructions
12 PNEG-1186 Smart-Flex (FLX-4629) Operation Instructions
Alarms
There are five (5) alarms modes for the Smart-Flex:
To reset alarms 2 through 5 above, you must push the Set/Clr button.
* When the pressure switch is activated, it will not sound an alarm when in extension mode.
Figure 2G Figure 2H
1 Toggle switch turned off Display will flash “OFF” (See Figure 2G.)
* 2 Pressure switch activated Display will flash “PrS” and sound an alarm (See Figure 2H.)
3 Maximum Run Time exceeded Display will flash “run” and sound an alarm (See Figure 2I on Page 13.)
4 Maximum Idle Time exceeded Display will flash “IdL” and sound an alarm (See Figure 2J on Page 13.)
5 Lost communication with Network Master Display will flash “AC14” (See Figure 2K on Page 13.)

Cumberland Smart-Flex FLX-4629 Specifications

General

Brand	Cumberland
Model	Smart-Flex FLX-4629
Category	Controller
Language	English