CUMMINS ALLISON JetSort 1606 User Manual

How to Use | JetSort
®
1606 interface with JetScan or JetCount | 9
Correcting Manually Entered Currency/Data
If an incorrect value is entered on the keypad, but ENTER has not yet been selected, press CLEAR
and re-enter the correct value. If an incorrect value is entered and ENTER has been selected, an
adjustment amount must be entered.
To make an adjustment to a media balance, enter on the numeric keypad the amount which must
be adjusted (added or subtracted from the amount previously entered). To add the adjustment
amount to the media total, press Enter. To subtract the adjustment amount from the media total,
press “ - “.
Press Enter to record the media value and return to the Batch Waiting condition.
Add to JetScan Totals through JetSort
1. From the Batch Waiting condition, press MEDIA.
2. Press DENOM to select the desired denomination.
3. Enter the total units for the desired denomination on the numeric keypad. For example, seven $10
notes are entered as 7.
4. Press ENTER.
5. Press DENOM to cycle through the denomination screens until the following screen appears:
TOT
70.00
COMPLETE
<ENTER>
6. To add notes to any entry, repeat steps two through seven.
7. Press ENTER to save new totals and return to Batch Waiting condition.

CUMMINS ALLISON JetSort 1606 Specifications

General

Brand	CUMMINS ALLISON
Model	JetSort 1606
Category	Banknote Counter
Language	English