Safety Information, Power Specifications
• Voltage operating range: 105-240 VAC, automatic switching
• Frequency: 50/60 Hz
• Full load amps (FLA): 1A/.5A
• Electrical supply circuit: The customer must provide a single-phase, dedicated power line
that meets the machine’s power requirements. Use a properly grounded circuit breaker in
compliance with applicable local electrical code.
Environmental Operating Conditions
• Temperature: 60°F - 85°F (15°C - 29°C)
• Humidity: 30% to 70% (non-condensing)
Compliance Acknowledgments
• Laser: This equipment may contain Class 2 laser products and complies with FDA Radiation
Performance Standards, 21 CFR Subchapter 1 and the international laser safety standard IEC-
60825.1-2001-08.
• FCC: This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
• Regulatory: CUL, CE
022-7661-00 – Rev. A
and unplug power cord from machine before cleaning.
Do not attempt repairs. Repairs must be made by authorized Cummins Allison
personnel.
Plug three-prong grounded plug (supplied) into properly grounded three-prong
outlet.
components, and void warranty.
Provide separate circuit serving only this device and follow listed power
requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
To Next Page
Loading...
Need help?
General
