CUMMINS ALLISON Universal JetScan 4166 User Manual

14
Stopping Conditions and Recovery Steps
Screens are listed alphabetically.
Denomination Sub Total
Batch Count
CHAIN DETECTED
Mode Total Batch Limit
Condition
Action
Universal JetScan may have
processed two or more notes as
one.
Remove all notes from the stacker and place them on the hopper. Press
Start
. If an alarm repeatedly occurs, adjust the gray thickness dial located
on top of the machine behind the hopper extension. Rotate in the negative
(-)
direction as indicated by the numbers on the front of the thickness dial.
Denomination Sub Total Batch Count
DENOMINATION CHANGE
Mode Total Batch Limit
Condition
Action
Universal JetScan has identified
a note that is different than
those it has been processing
while using sort modes.
This first note of the different
denomination is the top note
in the stacker.
Remove all notes from the stacker. Separate the top note from the
remaining notes. Put the top note in the location for its denomination. Put
all the other notes (they are all the same) in the location for their
denomination.
Universal JetScan automatically will restart.
Denomination Sub Total Batch Count
DOUBLE DETECTED
Mode Total Batch Limit
Condition
Action
Universal JetScan may have
processed two or more notes as
one.
Remove all notes from the stacker and put them on the hopper. Press Start.
If an alarm repeatedly occurs, adjust the gray thickness dial on top of the
machine behind the hopper extension. Rotate in the negative
(-)
direction as
indicated by the numbers on the front of the thickness dial.
This screen could
show any of these
messages:
• CHAIN DETECTED
• CHAIN DETECTED*
Single-Pocket Universal JetScan
®
Note Scanner All Models

CUMMINS ALLISON Universal JetScan 4166 Specifications

General

Brand	CUMMINS ALLISON
Model	Universal JetScan 4166
Category	Scanner
Language	English