CUMMINS ALLISON Universal JetScan 4166 User Manual

7
The Basics
Adjustable Hopper
The hopper is the area on top of the Universal JetScan where documents are placed for
processing. (See Machine Diagram.)
The hopper guides are adjustable and feature a series of numerical settings which correlate to
the width of documents.
When the desired country is selected, the required numerical setting for the hopper guides
will appear on the display.
By using the required numerical setting, there is less opportunity for documents to shift and
cause errors.
Choosing a Country
Hold down Mode for 2 - 3 seconds. Scroll through the available countries by pressing key
13 or key 14. Pressing Day toggles between two selected countries chosen in COUNTRY
TOGGLE. Press key 3 to return to normal operating mode.
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose
clothing.
To avoid an increase in no calls and feed errors, documents must be processed
at the required hopper-guide setting.
Denomination Sub Total Batch Count
ADJUST HOPPER
TO POSITION #2
Mode Total Batch Limit
When a new country is selected, sub-batch totals, batch totals and batch (strap)
counts are reset to zero.
Countries are selected at the time of purchase. To add more countries, contact
a Cummins Allison representative
.
© 2014 Cummins-Allison Corp.

CUMMINS ALLISON Universal JetScan 4166 Specifications

General

Brand	CUMMINS ALLISON
Model	Universal JetScan 4166
Category	Scanner
Language	English