11.
In pockets one and two, use a microfiber towel or vacuum to
clean the stacker-sensor lens located between the two gray
stacker wheels.
12.
In pockets one and two, use a microfiber towel or vacuum to
clean the stacker mirror located directly across from the
stacker-sensor lens.
13.
Replace feeder plate. Insert curved edge of feeder plate first.
Gently press down on feeder plate until it snaps into position.
Curved edge
14.
Return hopper to the operating position.
15.
Clean exterior surfaces as necessary with a Simple Green
Safety Towel.
16.
Carefully reconnect power cord.
© 2014 Cummins-Allison Corp.
To Next Page
Loading...
