Universal JetScan has processed
two or more notes that were
improperly spaced.
Remove all notes in the pocket indicated on the screen and place them in
the hopper. Press
to restart processing. Universal JetScan will revert
to the previous starting point before the “SPACING ERROR” occurred, with
no impact on batch (strap), sub-batch, batch and day totals.
Universal JetScan has sorted 100,
125 or 150 notes (limit selected
in
) into the pocket
indicated on the screen and
reached a “STACKER FULL”
condition.
This stopping condition is
available in all operating modes,
if batch (strap) limits are set at
infinity.
Remove notes from the pocket indicated on the screen.
Universal JetScan automatically will continue if additional notes remain in
the hopper.
The number of notes in the
pocket indicated on the screen
has reached the preset “STRAP
LIMIT.”
Remove notes from the pocket indicated on the screen.
Universal JetScan automatically will continue if additional notes remain in
the hopper.
Two-Pocket Universal JetScan
®
Note Scanner
All Models