Cupra BORN - Page 136

Air conditioningStationary air conditioning
135
The stationary air conditioning is powered
through a socket or the vehicle’s high voltage
battery. The stationary air conditioning can
be programmed and controlled in the infotain-
ment system and by using the My CUPRA App,
thanks to the CUPRA CONNECT Gen4 tech-
nology.
You can nd information about the app, its
availability and the necessary requirements for
its use, as well as compatible terminals, on the
Internet ››› page 215.
NOTICE
Never place food, medicines or other tem-
perature-sensitive objects close to the air
vents. Food, medicines and other objects
sensitive to heat or cold may be damaged or
made unsuitable for use by the air coming
from the vents.
Note
Using the stationary air conditioning with-
out connecting the charging cable reduces
the vehicle’s range. At extreme exterior tem-
peratures, the heating or cooling power of
the stationary air conditioning may be insuf-
cient to reach the desired temperature.
Managing the stationary air condi-
tioning
The stationary air conditioning only works if
the high voltage battery is suiciently charged.
The stationary air conditioning can be used
without the charging connector being plugged
in. When the charging connector is not plug-
ged in, the stationary air conditioning receives
the necessary electrical power from the high-
voltage battery.
Open the infotainment system's
Station-
ary air conditioning
menu
•
Switch on the ignition (only if the driver is not
in the vehicle).
•
Press the HOME button .
•
Press .
Setting the desired temperature
•
Open the infotainment system’s
Station-
ary air conditioning
menu.
•
Press .
•
Set the desired temperature with and
Immediately air-condition the parked vehi-
cle
•
Switch the ignition o.
•
Press in the Infotainment system’s depar-
ture menu
›››
page 38.
The vehicle will be air-conditioned for approx.
30 minutes. The function switches o auto-
matically. For this to work, the drive system
should not be switched on.
The vehicle can also be air-conditioned before
a desired departure time ››› page 136.
Managing the stationary air conditioning
•
Connect the drive system.
The stationary air conditioning switches o
automatically
•
After approx. 30 minutes if the air condition-
ing is on and the ignition is o.
•
After approx. 15 minutes if the drive system
has not been switched on by one hour after
the scheduled departure time.
•
When the state of charge of the high voltage
battery drops excessively.
Note
Noises will be heard while the stationary air
conditioning is running.