Cupra BORN - Technical Data; Indications about the Technical Data

Technical dataIndications about the technical data
327
Technical data
Indications about the
technical data
Vehicle identication data
The values indicated in the technical data may
dier depending on optional equipment or
version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the oicial vehicle docu-
mentation takes precedence at all times.
Vehicle ID number
The vehicle ID number can be found in the
following places:
•
In the infotainment system using the func-
tion button > Vehicle > Interior > In-
strument cluster > Service.
•
One the vehicle's data label.
•
In front, under the windscreen.
•
On the right in the front compartment.
Type plate
The type plate is located on the vehicle’s right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Performance
The values apply only to optimal road and
weather conditions.
The vehicle’s performance has been calcula-
ted without any equipment that would aect it,
e.g. accessories.
Empty weight, total weight, axle loads
The kerb weight values shown on the following
tables apply to the vehicle as ready to drive
with a driver (75 kg), operating uids and, if ap-
plicable, tools and the spare wheel. The speci-
ed kerb weight increases with optional equip-
ment and retrotting of accessories, which re-
duces the possible payload accordingly.
WARNING
The values indicated for the maximum per-
mitted weights must not be exceeded. There
is a risk of accident and damage!