Cupra BORN - Page 166

Assistant systemsACC - Adaptive Cruise Control
165
Vehicles with Travel Assist: you can extend this
time if you do not let go of the steering wheel.
The ACC remains active and the message ACC
ready to start is displayed on the instru-
ment cluster for a few seconds. You can extend
or reactivate this warning by pressing the but-
ton , or by grabbing the steering wheel if
your vehicle is tted with Travel Assist. During
this time, the vehicle will move o again if the
vehicle in front moves forwards.
To move o when the message ACC ready
to start
is not longer displayed, once the
vehicle in front has moved o:
•
Press the accelerator pedal.
•
OR: press the button on the multifunc-
tion steering wheel.
The ACC does not remain active in the follow-
ing cases:
•
The stopping phase lasts for several minutes.
•
When a vehicle door is opened.
•
If the ignition is switched o.
WARNING
If the message ACC ready to start is
displayed on the instrument cluster display
and the vehicle in front moves o, your vehi-
cle will move o automatically. In this case,
any obstacles in the road may not be detec-
ted. This may cause serious accidents and in-
juries.
•
Always check the road before moving o,
and apply the vehicle brakes yourself if nec-
essary.
ACC system limitations
Fig. 131 Vehicle on a bend.
Motorcyclist ahead, out of range of the
radar sensor.
Fig. 132 Vehicle changing lanes. One
vehicle turning and another stationary.
The limits of the ACC system mean that it is not
appropriate in all situations ›››
in Introduc-
tion on page 162.
CUPRA does not recommend using the func-
tion in the following cases
›››
:
•
Heavy rain, snow or fog.
•
When going through tunnels.
•
In sections with roadworks.
•
On routes with curves, e.g. on mountain
roads.
•
On o-road routes.
•
In covered car parks.
•
On roads with embedded metal objects such
as train or tram tracks.