Cupra BORN - Page 218

Data transmissionsCUPRA CONNECT Gen4
217
3. Select: > Users and press the button
to add a new user.
4. Follow the on-screen instructions to down-
load the My CUPRA App.
5. Follow the instructions to create your CU-
PRA ID.
6. Accept the Privacy Policy.
7. Check your personal details.
8. Enter the vehicle identication number
(VIN) to add the vehicle to your user ac-
count.
9. Select your CUPRA CONNECT Gen4 online
services pack.
10. Open the app and scan the new QR code
generated by the infotainment system.
After scanning the QR code and transferring
the data, the CUPRA CONNECT Gen4 online
services are activated.
To stay informed, CUPRA recommends adding
your favourite workshop to the My CUPRA App.
Legal provisions
When using CUPRA CONNECT services, infor-
mation is transferred and processed online
through the vehicle. Such data can also pro-
vide (at least indirectly) information about the
driver in question, for example, driving behav-
iour and location. As a contracting party in the
CUPRA CONNECT contract with SEAT, S.A.,
you must ensure that when your vehicle is
used by other drivers (for example, family or
friends), data protection and personal rights
are respected. Therefore, you must inform
drivers in advance that the vehicle transfers
and receives data online, and that you can ac-
cess such data.
Not taking into account this obligation to in-
form, can infringe certain rights of the occu-
pants.
Personal information
CUPRA protects your personal data and only
uses them, as long as the law allows it or you
have given your consent on the occasion of a
use. Detailed information on data processing
in connection with the CUPRA CONNECT serv-
ices can be found in the Data Protection Dec-
laration, the current version of which can be
accessed on the CUPRA website.
Permanent transfer of the vehicle
If the vehicle has been purchased used or
someone else has left the vehicle to you
for permanent use, CUPRA CONNECT may al-
ready be activated and the previous primary
user may still be able to access the data regis-
tered via CUPRA CONNECT and control certain
functions of your vehicle.
You can automatically remove the previous pri-
mary user by registering yourself as the primary
user of the vehicle. Alternatively, you can re-
store the infotainment system to factory set-
tings (
> Restore factory settings) or set
the vehicle to oline mode (
›››
page 219)
and therefore limit both your vehicle's commu-
nication with the CUPRA data service and the
processing of personal and vehicle data.
Deactivating CUPRA CONNECT
services
The following functions are available to ac-
tivate and deactivate the CUPRA CONNECT
services:
•
Allow or prevent data transmissions through
the infotainment system ››› page 219, Pri-
vacy mode, Privacy mode.
•
Wherever possible: individual deactivation or
activation through your user account in the My
CUPRA App.
You can run the relevant services again after
cancelling their deactivation.
Note
The services required by law and their data
transmission cannot be disconnected or de-
activated, for example, the emergency call
system (eCall).