Cupra BORN - Page 225

Data transmissions
224
The requirements must be met to use Apple
CarPlay™.
Launch Apple CarPlay™:
•
Press HOME > Full Link to access the Full
Link main menu.
•
Press Apple CarPlay™ to establish a connec-
tion with the iPhone™.
Disconnecting
•
In Apple CarPlay™ mode, press the CUPRA
icon to access the Full Link main menu.
•
Press to interrupt the active connection.
The representation of function buttons on the
screen may vary.
Special characteristics
During an active Apple CarPlay™ connection,
the following characteristics are applicable:
•
Bluetooth® connections between the
iPhone™ and the infotainment system are not
possible.
•
If there is an active Bluetooth® connection, it
is automatically interrupted.
•
The phone functions are only available
through Apple CarPlay™. The functions descri-
bed for the Infotainment system are not availa-
ble.
•
The connected iPhone™ cannot be used as
a media device in the
Media
main menu.
•
It is
not possible to use the built-in naviga-
tion system and the Apple CarPlay™ navigation
system at the same time. The last route started
interrupts the one that was previously active.
•
Depending on the infotainment system you
use, on the instrument panel screen you can
view data from the Telephone mode.
•
The instrument panel screen does not dis-
play any indication to turn.
•
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
Voice control
•
Press briey to start voice control using
the infotainment system.
•
Press this button for a long time to start voice
control (Siri™) of the connected iPhone™.
Note
•
The availability of technologies depends on
the country and may vary.
•
You will nd information about technical
requirements, compatible iPhones, certied
applications and their availability on the CU-
PRA and Apple CarPlay ™ websites, at spe-
cialised CUPRA dealerships or at any SEAT
dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
•
The mobile phone device, called smart-
phone from here on, must be compatible with
Android Auto™.
•
The smartphone must have an Android
Auto™ application installed.
•
If this is not possible via Android Auto Wire-
less, the smartphone must be connected via
the USB connection with data transmission to
the infotainment system.
•
The USB cable used must be an original ca-
ble provided by the smartphone manufacturer.
Android Auto Wireless: Bluetooth® and WLAN
(Wi-Fi) also have to be active on the smart-
phone.
Establish connection
When you rst connect a smartphone, follow
the instructions on the infotainment system
screen and on the smartphone.
The requirements must be met to use Android
Auto™.
Launch Android Auto™:
•
Press HOME > Full Link to access the Full
Link main menu.
•
Press Android Auto™ to establish a connec-
tion with the smartphone.