Cupra BORN - Page 233

Infotainment system
232
If an icon is missing on the screen, it is not a
device defect, but corresponds to the specic
equipment of the country or version.
The following menus can be included as an
icon on the home screen:
Main menus on the home screen
Navigation ››› page 246
Radio ››› page 239, Media
››› page 243
Telephone ››› page 254
Full Link ››› page 222
Settings ››› page 233
Vehicle ››› page 36
Data ››› page 35
Air conditioning ››› page 127
Sound
Users
Store
Legal
Help
Managing the infotainment system
Execute the functions and settings with the in-
fotainment controls.
Depending on the equipment, the infotain-
ment system has dierent controls:
•
Touch screen.
•
Touch zones outside the screen, for exam-
ple, Volume (+ -).
Opening the Quick Guide
You will nd more information and tips for han-
dling in the Quick Guide of the infotainment
system.
•
Press HOME > .
Connecting and disconnecting the infotain-
ment system
The infotainment system turns on when the
ignition is switched on, unless it has been man-
ually turned o beforehand.
The infotainment system starts-up with the last
set volume, provided that this does not exceed
the preset maximum start-up volume.
The infotainment system automatically turns
o when the driver's door is opened, provided
the ignition has been switched o beforehand.
Moving objects and adjusting volume
Move objects on the screen to adapt settings,
for example, with scrollable buttons or to move
the areas of a menu.
Depending on the equipment, menus and dis-
plays can be customised.
Increasing and reducing images or map sizes
Tip: use your thumb and index nger.
•
Press on the map with both ngers at the
same time and leave them on the screen.
•
To enlarge views, slowly separate one nger
from the other. To reduce views, slowly bring
one nger towards the other.
Note
If you turn on the infotainment system man-
ually with the ignition o, it will automatically
turn o after about 30 minutes.