Cupra BORN - Page 64

SafetyTransporting children safely
63
Vehicle i-Size positions
Front passenger seat
Rear side seat Rear central seat
airbag enabled airbag disabled
X i-U i-U X
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certication.
X: Position not suitable for i-Size child restraint systems.
Securing the child seat with the ISOFIX or
i-Size system
You must follow the child seat manufacturer's
instructions.
•
If necessary, remove the protective caps
from the ISOFIX or i-Size anchor points.
•
Press the child seat onto the ISOFIX or iSize
retaining rings until it is heard to engage se-
curely. If the child seat is equipped with Top
Tether anchor points, secure it to the corre-
spondent ring ››› page 64. Follow the child
seat manufacturer’s instructions.
•
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the ISOFIX or i-Size and Top
Tether attachment system can be purchased
from technical services.
WARNING
The securing rings are designed only for use
with ISOFIX or i-Size and Top Tether system
child seats.
•
Never secure other child seats that do not
have ISOFIX, i-Size or Top Tether systems, or
safety belts or any other objects to the se-
curing rings – as this can result in potentially
fatal injuries to the child.
•
Ensure that the child seat is correctly se-
cured to the ISOFIX or i-Size rings and the
Top Tether.