Cupra BORN - Page 77

High-voltage battery
76
Maximum battery charging limit
Normally, if you use the vehicle regularly, it is
not necessary to fully charge the high-voltage
battery. The maximum charging limit limits the
battery's maximum state of charge.
•
Move the touch slider to the desired value
in the infotainment system's charging settings
››› page 75.
The maximum charging limit can also be adap-
ted during charging.
Minimum charging limit of the battery
The minimum charging limit sets the minimum
state of charge for a saved routine. This func-
tion can be used to guarantee a minimum
range.
•
Press the
e-Manager
button in the infotain-
ment system's vehicle settings ››› page 36.
•
Set the minimum charging limit in the rou-
tine.
After connecting the electricity, rst of all the
vehicle charges up to the battery's minimum
charging limit. The preferred times or a de-
parture time, for programmed charging, will
only be taken into account once this limit is
reached.
Battery Care Mode
The “Battery care mode” is designed to extend
the life of the battery. By activating Battery
Care Mode, the maximum charging limit is au-
tomatically set to 80% ››› page 73.
•
Click on the menu: e-Manager > General
charging settings to access Battery Care
Mode.
Examples for charging with alternating cur-
rent (AC)
For AC charging, CUPRA recommends the fol-
lowing settings:
Everyday use - Long range is not necessary
•
Maximum battery charging limit: 80 % maxi-
mum.
•
Minimum battery charging limit: 20 % as a
minimum if the outside temperature is mild or
warm, or 40% if it is cool or cold.
Long distance travel - Long range required
•
Maximum battery charging limit: 100 %.
•
Minimum battery charging limit: 20 % as a
minimum if the outside temperature is mild or
warm, or 40 % if it is cool or cold.
•
Avoid leaving the vehicle parked and start
driving immediately after charging the battery.
Set charging locations (Routines)
You can create routines associated with charg-
ing locations in the infotainment system.
The vehicle automatically recognises a saved
charging location and uses the available set-
tings when charging.
Location data
The infotainment system uses the current lo-
cation data (geographical coordinates) of the
vehicle when you create or use a routine.
Creating a routine
•
Press the
e-Manager
button in the infotain-
ment system's vehicle settings ››› page 36.
•
Click on the “Routines” tab.
•
Add the charging location and give it a name
(maximum of 5).
Deleting a routine
•
Press the
e-Manager
button in the infotain-
ment system's vehicle settings
›››
page 36.
•
Click on the “Routines” tab.
•
Press the function button.
•
Press the function button to delete the
saved routine.