Current Tools 11 User Manual

CURRENT TOOLS • P. O. BOX 17026 GREENVILLE, SC 29606
800.230.5421 or 864.721.4230 • FAX 864.721.4232
www.currenttools.com
Model 11 High Speed Cable Puller
Operating, Maintenance, Safety
and Parts Manual
This manual is free of charge. All personnel who operate the Cable Puller should have a copy of this manual and
read and understand its contents. To request a copy of this manual or replacement safety decals, or for technical
assistance, call or write to the address below. All information, specifications and product designs may change
due to design improvements or updates and are subject to change without notice. Current Tools does not
assume any liability for damages resulting from misuse or incorrect application of its products.
Read and understand this material before
operating or servicing the Cable Puller. Failure
to understand how to safely operate and service
this unit may result in serious injury or death.
6/2023

Current Tools 11 Specifications

General

Brand	Current Tools
Model	11
Category	Tools
Language	English

Summary

Safety Alerts and Definitions

Safety Alert Symbol Definitions

Defines safety alert symbols, including DANGER, WARNING, and CAUTION, to convey hazard levels.

Important Safety Precautions

General Safety Precautions

Lists critical safety rules for operating the cable puller, covering environmental hazards and misuse.

Continued Safety Precautions

Continues listing essential safety rules for operating the cable puller, covering specific warnings and cautions.

Product Specifications

Product Features

Features Overview Diagram

Illustrates the cable puller with key components like the coupling head, gearbox, and drill bracket labeled.

Setup and Operation Guide

Attaching the Cordless Drill

Details the process of securely attaching the cordless drill to the cable puller using the bracket and strap.

Coupling Head Installation

Explains how to install and adjust the coupling head for proper angle of engagement with the conduit.

Boom Tube Setup for Pull Direction

Describes how to set up the inner boom tube for UP/DOWN or SIDE pull configurations.

Pulling Cable with Pulling Line

Details methods for attaching the pulling line or tape to the capstan for spooling during a pull.

Executing the Cable Pull

Provides instructions on performing the cable pull, including drill direction, speed, and line spooling.

Pulling Cable with Rope

Outlines the procedure for using approved pulling rope, including wrapping the capstan and controlling the pull.

Optional Stabilizing Leg

Explains how to attach a stabilizing leg using a 1/2" rigid conduit.

Common Setup Configurations

Exploded View: Model 11 Cable Puller

Parts List: Model 11 Cable Puller