10
4. Position the dishwasher next to a water tap
and a drain. Ensure the water inlet and drain
hoses are not kinked or squashed. The unit
must not stand on the mains cable.
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage to
the back of the unit.
5. Adjust the adjustable feet to obtain the
optimum levelling of the unit. The adjustment
of the rear feet is via a centre screw at the front.
* All images are for indication only; please refer to your individual unit for actual item.
Making sure the dishwasher is level is very
important. If its not level the door may not
seal properly and it may leak.
Currys Essentials Freestanding Dishwasher CDW45W18 Manual.indd 10 28/03/2018 16:10
To Next Page
