11
* All images are for indication only; please refer to your individual unit for actual item.
6. Make sure your plumbing is suitable for use
with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS using the
new water supply hose. OLD HOSE SETS MUST
NOT BE RE-USED. The water pressure from the
water mains needs to be at a minimum of 0.03
MPa and a maximum of 1.00MPa.
• Connect one end of the water supply hose
to your dishwasher, and then connect the
other end of the hose to your water mains.
Please ensure the black rubber seal is
in place.
• After connecting the hose, turn on your
water mains and check for leaks.
• Connect the dishwasher to the mains
socket.
You may use a Y-adaptor (not included)
for an additional water feed for another
appliance, for example a washing
machine. This is only applicable for cold
water mains. A Y-adaptor is available from
most DIY stores.
• Do not bend or kink your drain hose.
water mains
Y-Adaptor
(not included)
Connect
to another
appliance
if required.
water supply hose
Currys Essentials Freestanding Dishwasher CDW45W18 Manual.indd 11 28/03/2018 16:10
To Next Page
