Currys ESSENTIALS CFSGSV18 - Adjusting the Feet; Moving the Cooker; Stability Bracket

9
Adjusting the Feet
Your oven stands on 4 adjustable feet. When the oven is placed where it will be used, check if the oven is level. If it
is not level, you can adjust by turning the feet clockwise if required. It is possible to raise the appliance a maximum
of 30 mm by the feet. DO NOT move the appliance by dragging, it should only be moved by lifting it up.
Level the cooker by screwing the bottom of the feet in or
out, as shown.
Moving the Cooker
Stability Bracket
The supplied stability bracket or a recognized cooker stability device must be tted.
Using the tted adjustable feet is MANDATORY. For
safety reasons and to ensure adequate ventilation,
the cooker chassis MUST NOT sit directly on the
oor, a plinth, or other support surface.
• Two people must always raise the cooker, as shown, to
prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the oor.
50x60 : 420mm
Plastic Foot
Stability Bracket
Wall Plug
Washer
Screw
* All images are for indication only; please refer to your individual unit for actual item.
You can connect a stability
chain (not supplied) to the
screws shown here...
Currys Essentials Freestanding Gas Cooker CFSGSV18 Manual.indd 9Currys Essentials Freestanding Gas Cooker CFSGSV18 Manual.indd 9 14/01/2021 16:4314/01/2021 16:43