Curt Manufacturing 13203 User Manual (English)

To Next Page

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS

ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.

If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,

with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to

repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

6,000 900

8,000

900

CHEVROLET COLORADO & GMC CANYON

3/1/2017

13203

HITCH WEIGHT:

LBS.

INSTALL TIME

PROFESSIONAL: MINUTES

NOVICE (DIY): MINUTES

INSTALL NOTES:

Scan

for more

information

PAGE 1 of 2

SPARE TIRE

PASSENGER SIDE FRAME RAIL

DRIVER SIDE

FRAME RAIL

FACTORY CROSSMEMBER OR HITCH

REMOVE AND RETURN TO OWNER

VEHICLE BUMPER

TOOLS REQUIRED

RATCHET

13mm SOCKET

21mm SOCKET

9" EXTENSION

JACK STANDS

SPRAY LUBRICANT

WIRE PIPE BRUSH

TORQUE WRENCH

-LOWER SPARE TIRE

-REMOVE FACTORY COMPONENTS

-WELDNUT CLEANING

-NO DRILLING REQUIRED

EXISTING WELDNUTS

IN VEHICLE FRAME

4 PLACES EACH SIDE

REUSE FACTORY

MOUNTING HARDWARE

4 PLACES EACH SIDE

NOTE: REUSE FACTORY MOUNTING HARDWARE AND

MOVE CLIP NUTS TO SPARE TIRE SUPPORT BRACKET

SPARE TIRE

SUPPORT BRACKET

Need help?

Do you have a question about the Curt Manufacturing 13203 and is the answer not in the manual?

Curt Manufacturing 13203 Specifications

General

Brand	Curt Manufacturing
Part Number	13203
Category	Automobile Accessories
Tongue Weight	600 lbs
Material	Steel
Finish	Black powder coat
Installation	Bolt-on
Product Type	Hitch
Hitch Class	Class 3
Receiver Size	2 inches
Weight Carrying Capacity	6000 lbs
Weight Distribution Capacity	10, 000 lbs
Weight Distribution Tongue Weight	1, 000 lbs
Hitch Shank Size	2 inches