Curt Manufacturing 13364 - User Manual

CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
13364-INS-RA
•
05/13/2020
•
ECN7022
•
PAGE 1
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
Weight Carrying Capacity
Gross trailer weight (GTW) 4,000 lbs.
Tongue weight (TW) 400 lbs.
Weight Distribution Capacity
Weight distribution (WD) 5,000 lbs.
WD tongue weight (WDTW) 500 lbs.
INSTALLATION MANUAL
13364
Tools Required
Drive ratchet, 3/8" Torque wrench
Drive socket,
3/8"- 13mm
Drive socket,
3/8"- 18mm
Drive socket,
3/8"- 15mm
Screwdriver
Utility knife Punch
* For a tools reference guide visit
curtmfg.com/trailer-hitch-installation
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires you to lower the vehicle's exhaust. Some trimming
may be required. You will be using existing fasteners. No drilling is required
Periodic inspection of the trailer hitch should be performed to ensure all
mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
CAUTION
When tightening the trailer hitch to the vehicle, make sure
the hitch does not pinch or crush any AC lines, if applicable.
You will be using existing fasteners. Make sure to leave the
bolt on the passenger side to hold the bumper beam in position.
Parts List
You will be using existing hardware..
Product Photo
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.

Summary

Installation Overview and Specifications

Difficulty Level

Indicates the installation difficulty is 'Easy', based on time and effort.

Weight Capacity Limits

Specifies Gross Trailer Weight (GTW) and Tongue Weight (TW) limits.

Weight Distribution Capacity

Details weight distribution (WD) and WD tongue weight (WDTW) capacities.

Required Tools and Parts

Lists necessary tools and confirms use of existing hardware.

Important Warnings and Cautions

Highlights crucial safety warnings, installation cautions, and advice.

Safety Instructions and Warranty

Mandates wearing safety glasses and provides product registration info.

Assembly Instructions

Preparation and Bolt Removal

Locate and remove frame bolts, leaving one M12 bolt on the passenger side.

Exhaust Hanger Removal

Remove exhaust and muffler hangers to allow the exhaust to drop.

Hitch Mounting and Alignment

Raise hitch, align bracket holes, and check for pinched AC lines.

Fastener Torque Specifications

Torque M10 fasteners to 48 lb-ft and M12 fasteners to 86 lb-ft.

Exhaust Reinstallation

Reinstall muffler and exhaust hardware, adjusting hanger bracket if needed.

Towing Basics Information

Provides resources for information on safely towing your trailer.

Curt Manufacturing 13364 Specifications

General

Brand	Curt Manufacturing
Model	13364
Category	Automobile Accessories
Language	English