curt 13454 - User Manual

MAKE: STYLE:
MIN.20
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com
WEIGHT CARRYING:
INSTALLATION TIPS:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY: EASY
MODERATE CHALLENGING
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 877.287.8634
Safety glasses should be
worn at all times while
installing this product.
YEARS: 2020-PRESENT
FORD / LINCOLN
MODEL:
ESCAPE / CORSAIR
SUV
3,500
525
TRAILER WEIGHT:
TONGUE WEIGHT:
13454 INSTALLATION INSTRUCTIONS
LBS.
LBS.
MIN.
MIN.40
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
NOVICE INSTALL TIME:
PRO INSTALL TIME:
SCAN FOR
MORE INFO
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product
voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.
2/12/2020
EASY
SOCKET
3/4"
RATCHET
TORQUE
WRENCH
SOCKET
EXTENSION
6"
DIE GRINDER
MARKER
SAFETY
GLASSES
FISHWIRE HARDWARE
REVERSE FISHWIRE
HARDWARE

Summary

Product Overview and Safety Warnings

Towing Capacity Warning

Emphasizes not exceeding vehicle manufacturer's recommended towing capacity.

Installation Time and Difficulty

Provides installation time estimates and indicates the ease level of the installation.

Installation Walkthrough

Step 1: Align Hitch and Enlarge Holes

Align hitch, outline holes, and enlarge the forward most hole towards the rear.

Step 2: Fishwire Installation

Use fishwire to install spacers and carriage bolts through frame holes.

Step 3 & 4: Secure Hitch and Torque Hardware

Raise hitch, secure with flange nuts, and torque all hardware to specification.

Towing Safety Information

Weight Ratings and Measurement

Explains Gross Trailer Weight (GTW) and Tongue Weight (TW) measurement.

Weight Distribution and Sway Control

Defines Weight Distribution (WD) and Sway Control for safe towing.

Hitch Ball and Coupler Guidance

Guidance on selecting and using hitch balls and couplers.

Safety Chains and Electrical Wiring

Information on safety chains and trailer electrical wiring identification.

curt 13454 Specifications

General

Product Type	Hitch
Material	Steel
Installation	Vehicle-specific
Receiver Tube Size	2 inches
Hitch Receiver Size	2 inches
Finish	Black Powder Coat
Maximum Gross Trailer Weight	6, 000 lbs