Curtis G3 Series User Guide

Programming Options
4FFUIFmSTUQBHFPGUIFQSPHSBNNJOHHVJEFGPSJOTUSVDUJPOTPOBDDFTTJOHFBDIJOEJWJEVBMNFOVJUFN
To exit, press Źuntil Exit appears on the display, then press ~.
Tea Recipes - sets the tea recipe. Press
~ to access. Press Ż or Ź to choose from standard-gray, standard-
purple, Standard-Amber, Tropical-Gray, Tropical-Purple, 76/308-Gray or 76/308-Purple. Press ~ to save and
exit programming mode.
Tea by Volume - sets the tea brewing volume. After selecting this feature (
~), press the BREW button for
which the brew volume needs to be changed (SHIFT+BREW selects half batch on some models). Place
an empty container under the (empty) brew basket. Press the same BREW button again to start. When the
EFTJSFEWPMVNFJTSFBDIFEQSFTTUIF#3&8CVUUPOBHBJOUPTUPQUIFnPX5IFWPMVNFIBTCFFOTFU1SFTTŹ
to display the subsequent menu features.
Tea by Time - sets the amount of tea brewed according to time. Once accessed (
~), press the BREW button
for which the brew time needs to be changed (SHIFT+BREW selects half batch on some models). Press Ż or
Ź to highlight minutes or seconds. Press ~UPDIBOHFUIFTFUUJOH5IFSBOHFJTUP0ODFUIFBNPVOU
of time is entered, press ŹVOUJMFYJTnBTIJOHUIFOQSFTT~ to save. Press Ź to display the subsequent menu
features.
Tea Dilut. Delay - sets the delay until tea dilution begins. Once accessed (~), press the BREW button for
which the dilution delay needs to be changed (SHIFT+BREW selects half batch on some models). Press
Ż or Ź to increase or decrease time. The range is 0:30 to 10:00. Press ~ to save. Press Ź to display the
subsequent menu features.
Tea Dilut. Volume - sets the tea dilution volume. Once accessed (
~), press the BREW button for which the
dilution volume needs to be changed (SHIFT+BREW selects half batch on some models). Place an empty
container under the (empty) brew basket. Press the same BREW button a second time to start. When the
EFTJSFEEJMVUJPOWPMVNFJTSFBDIFEQSFTTUIF#3&8CVUUPOBHBJOUPTUPQUIFnPX5IFEJMVUJPOWPMVNFIBT
been set. Press Ź to display the subsequent menu features.
Tea Dilut. Time - sets the amount of tea dilution according to time. Once accessed (~), press the BREW
button for which the dilution time needs to be changed (SHIFT+BREW selects half batch on some models).
Press Ż or Ź to highlight minutes or seconds. Press
~UPDIBOHFUIFTFUUJOH5IFSBOHFJTUP
Once the amount of time is entered, press ŹVOUJMFYJTnBTIJOHUIFOQSFTT~ to save. Press Ź to display the
subsequent menu features.
Tea Dilut. Stir - turns the dilution stir feature On and Off. Once accessed (~), press the BREW button for
which stir needs to be turned On or Off (SHIFT-BREW selects half batch on some models). Press Ż or Ź to
toggle between On and Off. Press ~ to save. Press Ź to display the subsequent menu features.
Tea Pulse Brew - turns pulse brew On and Off and adjusts the pulse brew settings when set to On. Once
accessed (~), press the BREW button for which pulse needs to be turned On or Off (SHIFT+BREW selects
half batch on some models). Press ~ to save. If On is selected, subsequent screens will appear to adjust the
Pulse Count, On Time and Off Time. Press Ż or Ź to select the setting for each screen, then press ~ to move
to the next screen. Press Ź to display the subsequent menu features.
Tea Fast Brew - turns fast brew On and Off and adjusts the Delay Time when set to On. Once accessed
(~), press the BREW button for which fast brew needs to be turned On or Off (SHIFT+BREW selects half
batch on some models). Press Ż or Ź to toggle between On and Off, then ~ to save. If On is selected, the
Delay Time screen will appear. Press Ż or Ź to change the setting, then ~ to save. Press Ź to display the
subsequent menu features.
PROGRAMMING GUIDE PG4
8$130(3"..*/((6*%&ø "

Curtis G3 Series Specifications

General

Brand	Curtis
Model	G3 Series
Category	Brewing Systems
Language	English