.
CUSTOM S.p.A.
means, is forbidden. While guaranteeing that the information contained
the manual is used.
be improved are appreciated. Since products are subject to continuous
check and improvement, CUSTOM S.p.A. reserves the right to make
endorsement nor a recommendation. CUSTOM S.p.A. assumes no
THE IMAGES USED IN THIS MANUAL ARE USED AS AN
ILLUSTRATIVE EXAMPLES. THEY COULDN’T REPRO-
DUCE THE DESCRIBED MODEL FAITHFULLY.
UNLESS OTHERWISE SPECIFIED, THE INFORMATION
GIVEN IN THIS MANUAL ARE REFERRED TO ALL MOD-
ELS IN PRODUCTION AT THE ISSUE DATE OF THIS
DOCUMENT.
GENERAL INSTRUCTIONS
THE CE MARK AFFIXED TO THE PRODUCT CERTIFY
THAT THE PRODUCT SATISFIES THE BASIC SAFETY
• EN 55032 (Limits and methods of measurements of radio disturbance
characteristics of Information Technology Equipment)
• EN 55024 (Information Technology Equipment – Immunity character-
istics – Limits and methods of measurement)
• EN 60950-1 (Safety of information equipment including electrical busi-
ness equipment)
GUIDELINES FOR
THE DISPOSAL OF
THE PRODUCT
The crossed-out rubbish bin logo means that used electrical and electronic
• Do not dispose of this equipment as miscellaneous solid municipal
•
ment (EEE) is important in order to protect the environment and the
•
electronic equipment and the equipment can also be handed over to a
• The public administration and producers of electrical and electronic
equipment are involved in facilitating the processes of the re-use and
ganisation of collection activities and the use of appropriate planning
arrangements.
•
GENERAL SAFETY INFORMATION
•
•
•
• Make sure that the device rests on a hard (non-padded) surface and
•
• When positioning the device, make sure cables do not get damaged.
•
•
•
•
•
•
•
•
(IEC60950-1 second edition).
•
• Take care the operating temperature range of equipment and its ancil-
• Do not block the ventilation openings.
• Do not insert objects inside the device as this could cause short-circuit-
ing or damage components that could jeopardize printer functioning.
•
maintenance operations given in the user manual.
•
trained, authorized personnel.
•
build-up that could compromise the correct, safe operation of the unit.
•
•
To Next Page
Loading...
Need help?
General
