Need help?Do you have a question about the Custom Audio Electronics VKP80II and is the answer not in the manual?
General| Brand | Custom Audio Electronics |
|---|---|
| Model | VKP80II |
| Category | Printer |
| Language | English |
Details the organization and content of the manual's chapters.
Explains the meaning of symbols like NOTE, ATTENTION, and DANGER.
Step-by-step guide on how to unpack the printer and its components.
Identifies external components of the printer from the front.
Identifies external components of the printer from the rear.
Explains product label details and key functions in standby mode.
Details the functions of LF and FF keys during power up for setup and testing.
Explains the meaning of different status LED flash patterns and colors.
Instructions on how to physically mount the printer using fixing holes and screws.
Provides a diagram showing fastening points and a formula for screw length.
Recommends ticket lengths for retracting mode and provides dimensions.
Illustrates the physical connections for serial, USB, and power.
Details pin configurations for power and USB connectors.
Details RS232 pinout and shows an example PC connection.
Lists supported OS and general steps for driver installation.
Instructions on how to adjust the paper width using slides and reference points.
Step-by-step guide on how to insert a new paper roll.
Illustrates the angle limits for paper roll positioning without a holder.
Describes the procedure to enter the printer's configuration mode.
Explains how to use keys to navigate and select parameters in configuration mode.
Shows an example of a setup report and lists its sections.
Explains the meaning of status indicators in the setup report.
Details configuration parameters for serial and USB interfaces.
Details parameters related to print mode, speed, retract, and notch alignment.
Details parameters for current consumption and print density adjustment.
Explains how to use the Hexadecimal dump for diagnostics.
Recommends a schedule for cleaning different printer parts.
Provides instructions and precautions for cleaning the cutter.
Provides instructions and precautions for cleaning the paper presence sensors.
Provides instructions and precautions for cleaning the paper path and rollers.
Provides instructions and precautions for cleaning the printing head.
Provides instructions and precautions for cleaning the dragging roller.
Provides instructions and precautions for cleaning the printer's external case.
Step-by-step guide for updating printer firmware using a serial connection.
Step-by-step guide for updating printer firmware using a USB connection.
Details general, interface, memory, printer, and paper specifications.
Lists power supply, consumption, and operating/storage conditions.
Details character density, speed, and ejector functions.
Provides detailed physical dimensions of the printer.
Provides physical dimensions of the optional power supply unit.
Details paper specifications including notch placement for 60mm and 75mm widths.
Details paper specifications including notch placement for 80mm and 82.5mm widths.
Displays the PC437 character code table for Western languages.
Displays the PC850 character code table for multilingual support.
Displays the PC863 character code table for Canadian/French.
Displays the PC865 character code table for Nordic languages.
Displays the PC858 character code table including the Euro symbol.
Lists available thermal paper rolls with specifications.
Lists available accessories like power supply and cables with codes.
Details the adapter cable for connecting the printer to the power supply.
Describes the paper roll holder kit and its assembly.
Shows printer dimensions when the paper roll holder is assembled.
Describes the shutter device kit that prevents insertion of paper or foreign objects.
Shows printer dimensions when the shutter device is assembled.
Explains the need to enable the "Notch Alignment" parameter for alignment.
Describes the automatic sensor calibration process and its results.
Defines alignment point and Notch Distance, and their relationship.
Illustrates distances between sensors, head, and cutter.
Explains how to calibrate the printing area based on notch distance and paper feed.
Provides instructions on what data to provide when contacting technical support.
To Next Page