ELECTRICAL SPECIFICATIONS VKP80II
Power supply 24 Vdc ±10% (optional external power supply)
Medium consumption
(6) (7)
1 A
Stand-by consumption
(6)
0,04 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY cod.963GE020000003 (OPTIONAL)
Power supply voltage from 100Vac to 240Vac
Frequence from 50Hz to 60Hz
Current (output) 24 Vdc ± 10%
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from -20°C to +70°C ±10%
Relative humidity from 10% Rh to 80% Rh
Storage temperature from -20 °C to +70 °C
Storage relative humidity from 10% Rh to 90% Rh
NOTES:
(1)
: For paper from 90 g/m
2
to 110 g/m
2
enable the dispenser continuous mode with command ($1D $65, see Com-
mand Reference).
(2)
: For ticket width = 60mm do not exceed a max length of 250mm.
(3)
: It’s better to use an external shock absorber for rolls with a diameter higher than or equal to 100mm.
(4)
: Referred to model with paper holder support.
(5)
: Referred to model without paper holder support.
(6)
: Referred to “Normal” value for “Current” parameter (see Printer Setup).
(7)
: Referred to a standard CUSTOM receipt (L = 10cm, Density = 12,5% dots on).
7. SPECIFICATIONS
46 VKP80II User Manual
To Next Page
Loading...
