5.3 Printer status
Printer operating status is indicated in the confi guration print-out in which, next to the name of the components dis-
played, the following information is given:
INTERFACE is given the interface present
PROGRAM MEMORY TEST the message OK appears if functioning and NOT OK if faulty.
DYNAMIC RAM TEST the message OK appears if functioning and NOT OK if faulty.
EEPROM TEST the message OK appears if functioning and NOT OK if faulty.
CUTTER TEST the message OK appears if functioning and NOT OK if faulty.
HEAD VOLTAGE is given the voltage of the head.
HEAD TEMPERATURE is given the temperature of the head.
PAPER PRINTED is given the number of centimetres of paper printed.
RETRACT COUNTER is given the number of “retract” made
CUT COUNTER is given the number of cuts made.
POWER ON COUNTER is given the number of power-ups made
5. CONFIGURATION
30 VKP80II User Manual
To Next Page
Loading...
Need help?
General
