Custom Audio Electronics VKP80II - Configuration; Entering Configuration Mode

5 CONFIGURATION
5.1 Confi guration mode
To enter the confi guration mode and print a SETUP report with the operating parameters of the printer, proceed as
follows.
1
During power-up, hold down the LINE FEED key
while the wiring is plugged into the power supply connector of the printer.
2
The device prints a SETUP report.
STATUS
LINE FEED
FORM FEED
RS232
Vin
LF
FF
LINE FEED
KEY
(hold down)
+
POWER SUPPLY
PRINTER SETUP
5. CONFIGURATION
User Manual VKP80II 27