4
Proceed with the configuration by using the keys according the functions printed on paper (see par.2.3).
For description and values of setup parameters, see the following paragraphs.
3
Press the FORM FEED key to enter the configuration mode
LF
FF
FORM FEED
KEY
(fast push)
PRINTER SETUP
NOTE:
During power-up, if the LINE FEED key is held down, the printer enters the auto-test routine and prints out the setup
report. The printer will remain in standby in Hexadecimal dump mode (see following paragraphs) until another key
is pressed or characters are received through the printer communication port.
When the FORM FEED key is pressed, the printer enters parameter confi guration.
When the LINE FEED key is pressed, the printer exits setup and terminates the Hexadecimal dump function.
5. CONFIGURATION
28 VKP80II User Manual
To Next Page
Loading...
