Custom Audio Electronics VKP80II - Installation for Retracting Mode

3.2 Installation and use with “retracting” mode
In the following table are reported the length recommended for the tickets using of the retracting mode:
TICKET LENGTH TICKET PRESENTATION (MAX)
70 mm 10 mm
80 mm 10mm ÷ 30mm
80mm ÷ 220mm 10mm ÷ 30mm
125.5
38.5 11
149.5
45.5
70.5
121.2
52.9 8.1
100
85.5
+0.5
-0.5
+0.5
-0.5
+0.5
-0.5
80 (82,5)
9.5
M4; n°3 filetti
90° max
Note “Ejector outfeed”:
When assembling the printer on the machine, be sure to leave adequate space for the paper loop below. If this is
not done, the ticket could crease at the cutting area, causing the ticket to jam in the paper outfeed opening.
3. INSTALLATION
User Manual VKP80II 17