7 SPECIFICATIONS
7.1 Hardware specifi cations
GENERAL
Sensors
Printing head temperature, notch presence, paper presence,
paper presence on output, printing unit open,
(near paper end on external paper roll holder optional)
Emulations ESC/POS™
INTERFACES
RS232 serial connector from 1200 to 115200 bps
USB connector 12 Mbit/sec
MEMORIES
Flash memory 384 Kbytes
Receive buffer 16 Kbytes
Graphic memory 2 logos of 608 x 862 (for 80/82.5 mm paper width)
PRINTER
Resolution 203 DPI (8 dot/mm)
Printing method thermal, fi xed head
Printing mode normal, 90°, 180°, 270°
Printing format height/width from 1 to 8, bold, reverse, underlined, italic
Character fonts PC437, PC850, PC860, PC863, PC865, PC858 (euro)
Printing speed
High quality = 80 mm/sec
Normal = 180 mm/sec
High speed = 220 mm/sec
PAPER
Type of paper Thermal rolls, thermal side on outside of roll
Recommended types of paper
(1)
from 55 g/m
2
to 110 g/m
2
(KANZAN)
Paper width
(2)
from 60 mm to 82,5 mm
External roll diameter
max 180 mm
(4)
upper fi xing : max 150 mm
(5)
rear or lower fi xing : max 180 mm
(5)
Internal roll core diameter 25 mm
Core type Cardboard or plastic
7. SPECIFICATIONS
User Manual VKP80II 45
To Next Page
Loading...
Need help?
General
