9
Installation Guide
Setting up the bed mattress and attaching the mattress retainer
1
2
3
4
Open the shipping carton containing the bed mattress and take out the bed mattress.
Unzip the mattress cover to access the "loop" retainer anchors. NOTE: Keep the mattress cover open.
Align the open ends of the retainer bar with the “loop” retainer anchors located at the foot of the bed.
Slide the retainer bar into the anchors allowing the ends to glide into the loop.
4
5
Cut the plastic casing of the bed mattress carefully.
Unroll the bed mattress and remove the plastic casing completely.
6
7
With the mattress cover still open, insert the bed mattress.
Make sure the bed mattress ts well inside the mattress cover. Close the zippers of the mattress cover.
To Next Page
Loading...