Page 17 of 34
Installation Completion & Final Check List
Brief the customer on the operation of the appliance and give them the
instruction booklet. The customer must be told of the need for regular
servicing of the appliance (every 12 months), this will be at least once a
year, and they must be made aware that no rubbish is to be thrown onto the
fire bed. The customer must also be aware that purpose provided
wall vent “free air” ventilation should be checked regularly and must
“never” be intentionally blocked. The Fire is supplied with a
Warranty Card this should be completed by the installing Engineer
and handed to the customer for return to the factory.
• Is the Gas Pressure Correct? (within 1mb of rating)
• Is the Air Vent fitted and providing the specified amount of
“free air” – if in doubt contact the vent manufacturer for vent
“free area” sizing.
• Does the room comply to the minimum size or greater?
• Does the Room have a window that can be opened?
• Has the customer being shown how to operate the appliance?
• Has the customer been told of the reason for the air vent and
why it must never be blocked?
• Has the warranty card been completed and given to the
customer?
If you have any questions, or the fire is not operating correctly,
please use the fault diagnosis section or call the CVO Technical team
on 01325 327221 BEFORE you leave the installation. As part of our
Customer Service procedure you will be asked for the Fire Serial
number [on the front cover of the booklet] and Gas Safe
Registration.
If the appliance is not fitted in strict accordance with these
instructions, CVO cannot be held responsible for any damage caused
and reserve the right to charge for any corrective work.
To Next Page
