CVO Fire Fire Wave User Manual

Page 1 of 42
CE PIN NUMBER: 0063BT5051
Revision-7 [2011]
Fire Wave
INSTALLATION MANUAL
Serial Number
Please quote this serial number when contacting CVO Fire.
Important
• It is recommended, even if you have installed these appliances before, that you take the
time to read through these instructions and follow them step by step.
• The appliance is CE approved for use with Natural Gas – I2H, I2E, 2E+, I2L and LPG I3P, I3+,
I3B/P. Check the data plate for actual appliance setting.
• This manual must be handed to the owner of the property once the appliance is
commissioned and retained onsite for operation and servicing reference.
• The appliance has a manufacturer’s warranty valid for 1 year from date of delivery. In order
to validate the warranty the appliance must be installed by a GAS SAFE Engineer.
• The warranty card supplied with this booklet should be completed by the GAS SAFE Engineer
and posted to : Customer Service Dept, CVO Fire. 4 Beaumont Square, Aycliffe Industrial
Park, Newton Aycliffe. County Durham. DL5 6XN.
• Whenever contacting CVO Fire regarding the appliance please have the serial number and the
installers GAS SAFE registration number available.

CVO Fire Fire Wave Specifications

General

Brand	CVO Fire
Model	Fire Wave
Category	Indoor Fireplace
Language	English

Summary

1. Appliance Technical Data

1.1. General Specification

Details general specifications including gas type, pressure, burner details, and countries of destination.

2. Appliance General Information

Safety Warnings and Installation Guidelines

Important warnings about system adjustment, flame sensing, OEM parts, and qualified installation.

5. Remote Control System

6. Appliance Installation Instructions

6.1. General Installation Requirements

Covers gather unit, flue requirements, clearances, opening material, and gas supply connections.

6.2 Burner Ventilation Requirements

Details the need for fresh air supply to the burner box for correct operation and to prevent heat damage.

6.3 Appliance Installation

Specifies preparation of the opening, fitting the enclosure, gas supply connection, and sealing the system.

6.4 Gas Supply

Outlines gas flow rates for Natural Gas and LPG/Propane and pressure testing requirements.

6.4 Final Checks before lighting the fire

Covers checks for remote system, sealing, burner tray holes, gas leaks, room ventilation, and LPG bottle usage.

7. Appliance Commissioning Instructions

Commissioning Procedure and Pressure Testing

Step-by-step guide for commissioning, including gas soundness, battery connection, and pressure validation.

Commissioning Steps and Warranty Validation

8. Appliance Start Up / Shut Down Instructions

8.1 Using the Remote Control Handset

Remote Handset Operation Summary

8.2 Using the Manual Control Panel

8.3 How to Shutdown the appliance if the appliance is lit and both the Handset and Wall Switch are Faulty.

9. Appliance Fault Diagnosis Instructions

9.a. General Faults and Checklists

Remote Specific Faults

9.b. Battery Remote System - Fault Diagnosis

11. Appliance Servicing Instructions

13. Appliance Warranty

14. Fitting the Optional Wall Switch

Wall Switch Installation Instructions

15. Converting the Fire to Mains Supply

Procedure for Mains Power Conversion

17. Fire Wave USER MANUAL

10. Battery Remote System - Fault Diagnosis

11. Appliance Warranty