Page 2 of 42
Contents
1 Appliance Technical Data
2 Appliance General Information
3 Warning for Fire Guards and Hearths
4 Appliance Unpacking Instructions
5 Remote Control System
6 Appliance Installation Instructions
7
Appliance Commissioning Instructions
8
Appliance Start Up / Shut Down Instructions
9a Appliance Fault Diagnosis Instructions
9b Battery Remote System – Fault Diagnosis
9c Battery Remote System - Schematic
10 Appliance Cleaning Instructions
11 Appliance Servicing Instructions
12 Appliance Spare Parts
13 Appliance Warranty
14 Fitting The Optional Wall Switch
15 Converting The Fire To Mains Supply
16 Contact Details
17 User Manual
Every appliance has been designed, manufactured and type tested to ensure that it
conforms to the current national and European DFE (decorative fuel effect gas fire)
legislation.
If you have any queries regarding these
instructions or require additional technical
support or advice on the installation of our
products, please contact our technical
support team on 01325 327 221.
Every fire is bubble tested to 150mBar,
flow rated and given a 100% function test.
This ensures that all CVO Fires work fully
when leaving the factory. When installed
To Next Page
Loading...
