Page 29 of 42
15. Converting the Fire to Mains Supply
This must be done by a GAS SAFE Engineer and trained electrician.
1. Parts Required:
a. Mains Power Adaptor
b. Mains Power Connector
c. These are available as optional spare parts from the customer service
department. Call 01325-327221
2. Procedure
a. Remove the remote heat shield and disconnect the battery pack, supply lead
and reset switch from the fire.
b. Replace the reset switch with the power supply cable.
c. Connect the power adaptor to the supply cable.
d. Connect the power adaptor to the mains supply.
e. SEE IMAGES BELOW
To Next Page
Loading...
