Page 7 of 34
Unpacking the Appliance
Read these instructions fully before proceeding
Carefully examine the carton for damage before unpacking. If it is obviously
damaged, consult the supplier over whether to proceed.
Check Contents before proceeding:
• Gas Fire (Box #1)
o Gas Fire.
o Wall Bracket.
o Install Booklet.
• Gas Fire Surround (Box #2)
o Fire Fascia
Make sure the carton is stood upright and open the top. Remove the
cardboard, and place to one side; this can be used as a floor protector when
installing the fire. Remove the fire and examine its general condition, paying
particular attention to the fascia, and the stainless steel inglenook. If
satisfied by the general condition, place the decorative components to one
side and proceed with the installation. If in any doubt, seek advice from the
supplier. Read the instructions fully before proceeding.
To Next Page
Loading...
