Page 30 of 34
To turn OFF the main burner, turn the control to MIN - press the knob in
gently and turn it clockwise to the PILOT position. To turn off the pilot,
press knob in and turn to
OFF. [See image above]
Fire Lighting Sequence Summary
To Light:
Step 1: From OFF press the control knob in and turn slowly anti-
clockwise
Step 2: When the ignition click occurs check that the pilot is lit. (If
not repeat steps 1 and 2)
Step 3: Hold the knob in for 10 -12 seconds
Step 4: Release knob and check pilot remains alight
Step 5: Turn knob until the high flame logo is at the top, the fire
should then ignite
Step 6: Adjust flames to high or low level by turning the knob either
way without pressing in the knob
To extinguish:
Step 1: Turning the Fire Off: Turn control knob clockwise to MIN
position.
Step 2: Press in the knob gently until you are able to continue
turning clockwise to PILOT.
Step 3: To extinguish the pilot press knob in and turn to OFF,
although the pilot can be left permanently lit, if required.
To Next Page
