CYBELEC CybTouch 8 G User Manual

5/34
CybTouch 8 G – User Manual
Aug.
2016
V3.1
(Menu Button) → Other menus → User preference
uSer preferenceS
The Status page shows the status of all inputs and outputs and axes positions of the NC.
This feature is very useful during setup or during phone service with a machine installed in
the field.
This page is accessed from anywhere by pressing the Status Pages Zone (see page 4).
To exit the Status page, press on the arrow on the left.
STaTuS paGe
To exit the User Preference page, touch the button.
Press arrow to
exit Status Page
On the upper line, a cycle
message may appear
indicating the cycle phase
the machine is executing

CYBELEC CybTouch 8 G Specifications

General

Brand	CYBELEC
Model	CybTouch 8 G
Category	Control Panel
Language	English