What to do if my Cyber Power BP72V60ART2U Control Unit shows a Battery Failure?
If your Cyber Power Control Unit indicates a 'Battery Failure', it means the UPS has failed a Battery Test. First, check the battery connector and battery breaker. If the issue persists, contact technical support to replace the battery.
What to do if my Cyber Power BP72V60ART2U Control Unit shows 'Over Charge'?
If your Cyber Power Control Unit displays 'Over Charge', it means the battery is overcharged. First, remove the battery connector and check the charger voltage. Then contact CyberPower for repair.
What to do if my Cyber Power BP72V60ART2U Control Unit says 'BAT Disconnected'?
If your Cyber Power Control Unit displays 'BAT Disconnected', it indicates missing battery power. Check the battery connector and battery breaker to resolve this issue.
Why does my Cyber Power Control Unit say 'Replace Battery'?
If your Cyber Power Control Unit displays 'Replace Battery', it means the battery will soon need to be replaced due to insufficient runtime. Contact technical support to replace the battery.
Step-by-step guide for mounting the EBM into a server rack.
Step-by-step guide for connecting one EBM to a UPS.
Procedures and precautions for replacing the EBM batteries.
General| Brand | Cyber Power |
|---|---|
| Model | BP72V60ART2U |
| Category | Control Unit |
| Language | English |
To Next Page