19
Maintenance
The cabinet is fully automatic and apart from cleaning needs very little
maintenance. Interior and exterior should be cleaned with soap and water
and no abrasives should be used as they will scratch and spoil the
stainless-steel finish.
Maintenance and Cleaning
Before cleaning and maintenance, the cabinet should be in standby mode
then unplugged from the power supply.
Door Gaskets should be cleaned with warm soapy water and inspected on
a regular basis, and if damaged they should be replaced. Cooking oils and
harsh cleaning detergents will shorten the life of the gaskets and contact
should be avoided.
Condenser Cleaning
All the heat removed from the cabinet is discharged into the room via the
Condenser, like a car radiator. This must be kept clean so that the air can
pass through it to remove the heat, if it becomes choked with dust the unit
To Next Page
Loading...