20
will overheat and this can lead to poor cooling performance, increased
energy consumption and premature mechanical failure. The condenser
should be brushed with a soft brush to remove any dust deposited on the
alloy fins. The frequency of this cleaning is determined by the amount of
dust in the surrounding area but should be cleaned at least 4 times a year.
Gasket Replacement
Damaged gaskets can easily be replaced. Remove the old gasket by gently
pulling it out of the gasket retainer and simply push in the new gasket
leaving the corners until last.
End of Life Disposable Requirements
Refrigerated cabinets have components that could be harmful to the
environment. All end of life equipment must be disposed of in accordance
with national laws and regulations.
To Next Page
Loading...