21
Fault Finding
In the event of cabinet fault/failure, please check the following:
1. Plug is in socket and power to the socket can be proven by plugging
another appliance into the same socket or swapping the problem cabinet
to a socket that is known to work.
2. The fuse located in the plug is intact.
3. The condenser is clean and free from dust or debris.
4. Door gasket is sealing and free from damage.
If this doesn’t solve the problem, please call a qualified technician.
When requesting a service call, please find the manufacturer’s data plate
& provide the model, serial number & details of any fault codes that are
displayed.
To Next Page
Loading...